Latest activity
-
DonaldTV replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.RESOLVED. Firmware update to 2.21.4 plus a factory reset fixed it permanently. URL survives multiple power cycles now. -
KevinNet replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.Using the original power adapter that came with the MAG is important. Third-party adapters sometimes output insufficient current even if... -
LindaForum replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.Also check: some MAG power supplies output slightly below spec voltage. Insufficient power can prevent proper write operations to flash... -
DVR_Dan replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.Factory reset process for MAG: 1. Settings → Advanced Settings → Factory Reset. 2. Confirm the reset. 3. Allow the device to reboot... -
PaulHD replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.After firmware update, do a factory reset before re-entering the URL. A clean state sometimes resolves persistence issues that survive... -
DNSfixer replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.I tried the firmware update but the issue persisted. What else can cause this? -
NvidiaShield_Greg replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.My MAG 254 had the same issue and a firmware update fixed it completely. The URL now persists through power cycles. -
mark_wifi replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.Settings → Information → Firmware Version. Note the full version string and compare with the latest available on infomir.eu. -
TechMike88 replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.How do I check my firmware version on the MAG? -
BufferKiller replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.Which firmware version is your MAG 322 running? This problem was fixed in specific firmware releases. -
GaryStream replied to the thread MAG device keeps losing the portal URL after power off — permanent fix.This is a known issue on certain MAG firmware versions. The portal URL is stored in volatile memory on affected units. -
CindyApps posted the thread MAG device keeps losing the portal URL after power off — permanent fix in MAG Setup & First Configuration.Every time I unplug my MAG 322 the portal URL resets to blank. I have to re-enter it every time. There has to be a way to make it remember. -
PatriciaHD replied to the thread MAG device shows black screen after entering portal URL — solved.Moderator note: if you continue to have issues, contact your service provider's support with a description of the error. Do not post... -
TV_Tim replied to the thread MAG device shows black screen after entering portal URL — solved.Good resolution. For others: the MAG keyboard is small and slow. Consider using a USB keyboard for URL entry to avoid typos. -
TomBuffer replied to the thread MAG device shows black screen after entering portal URL — solved.SOLVED for me: I had a typo in the URL — one character off. Compared character by character with the confirmation email and found it...